philips FL1.1AA Repair Tips
Search: FL1.1AA philips
Results 8
Results 8
Make | Model Ch. | Symptom | Problem Solution | Solution | By: |
---|---|---|---|---|---|
Philips | FL1.1AA | Int shutdown with lights flashing | Check the 18v zener D6376 | ||
Philips | FL1.1AA | Width int reduces with no E-W corr | Crack in print between R3608 & R3607 | ||
Philips | FL1.1AA | To over-ride prot cct | Short pins S24 & S25 momentarily | ||
Philips | FL1.1AA | Reverts to st/by & prot mode at sw on | Dry joint L5521 or C2504 blue disc ceramic cap leaky or lack of POR signal due to o/c in track from Tr7272 coll to small signal panel jumper | ||
Philips | FL1.1AA | Line prot cct operating | Crack in print near scan coils plug | ||
Philips | FL1.1AA | INT SHUTDOWN ( LIGHTS FLASHING ) | D6373 ( 18v ZENER ) | ||
Philips | FL1.1AA | Int goes into prot mode - st/by, mute & stereo LEDs flashing | D6376 18v zener sm | ||
Philips | FL1.1AA | Chirps at sw on then goes into prot mode | Transistors 7542 & 7540 in E-W cct s/c |